Linux version 2.6.16-rc5 (root@t43) (gcc version 4.0.3 20060304 (prerelease) (Ubuntu 4.0.2-10ubuntu1)) #1 SMP Mon Mar 6 08:01:53 UTC 2006 EFI: EFI v0.8192 by Apple ACPI=0x3fefd000 <6> ACPI 2.0=0x3fefd014 <6> SMBIOS=0x3fec9000 0MB HIGHMEM available. 1022MB LOWMEM available. On node 0 totalpages: 261832 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 257736 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.4 present. ACPI: RSDP (v002 APPLE ) @ 0x3fefd014 ACPI: XSDT (v001 APPLE Apple00 0x00000044 0x01000013) @ 0x3fefd120 ACPI: FADT (v003 APPLE Apple00 0x00000044 Loki 0x0000005f) @ 0x3fefb000 ACPI: HPET (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fefa000 ACPI: MADT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef9000 ACPI: MCFG (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef8000 ACPI: ASF! (v032 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef7000 ACPI: SBST (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef6000 ACPI: ECDT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef5000 ACPI: SSDT (v001 APPLE SataPri 0x00001000 INTL 0x20050309) @ 0x3fec5000 ACPI: SSDT (v001 APPLE SataSec 0x00001000 INTL 0x20050309) @ 0x3fec4000 ACPI: SSDT (v001 APPLE CpuPm 0x00003000 INTL 0x20050309) @ 0x3feef000 ACPI: DSDT (v001 APPLE MacBookP 0x00010001 INTL 0x20050309) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1 already used, trying 2 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 10100000 (gap: 10000000:00400000) Built 1 zonelists Kernel command line: BOOT_IMAGE=atapi2:\EFI\elilo\vmlinuz video=imacfb:i17 acpi=force libata.atapi_enabled=1 init=/linuxrc root=/dev/ram0 pcboot=cdrom mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1029736k/1047328k available (2629k kernel code, 14376k reserved, 756k data, 248k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Oops: efitime: can't read time status: 0x80000007 hpet0: at MMIO 0xfed00000 (virtual 0xb8800000), IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Using HPET for base-timer Using HPET for gettimeofday Detected 1997.371 MHz processor. Using hpet for high-res timesource Calibrating delay using timer specific routine.. 4000.45 BogoMIPS (lpj=8000917) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000 Checking 'hlt' instruction... OK. CPU0: Intel Genuine Intel(R) CPU 1500 @ 2.00GHz stepping 08 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3994.83 BogoMIPS (lpj=7989679) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000 CPU1: Intel Genuine Intel(R) CPU 1500 @ 2.00GHz stepping 08 Total of 2 processors activated (7995.29 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=4000 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 1095k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG ACPI: Subsystem revision 20060127 ACPI: Found ECDT ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: Embedded Controller [EC] (gpe 23) interrupt mode. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: 98300000-983fffff PREFETCH window: 80000000-8fffffff PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: 98200000-982fffff PREFETCH window: 3ff00000-3fffffff PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: 98100000-981fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: 1000-1fff MEM window: 94100000-980fffff PREFETCH window: 90000000-93ffffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 94000000-940fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Enabling device 0000:00:1c.2 (0000 -> 0003) ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 audit: initializing netlink socket (disabled) audit(2254587648.644:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 imacfb: framebuffer at 0x80010000, mapped to 0xb8900000, using 10350k, total 16384k imacfb: mode is 1440x900x32, linelength=5888, pages=1 imacfb: scrolling: redraw imacfb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 180x56 fb0: IMAC VGA frame buffer device Real Time Clock Driver v1.12ac i8042.c: No controller found. RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v0.15 addr 0x98200000 irq 16 Yukon-EC (0xb6) rev 2 sky2 eth0: addr 00:16:cb:8b:bf:f7 libata version 1.20 loaded. ahci 0000:00:1f.2: version 1.2 PCI: Enabling device 0000:00:1f.2 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x4 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ata1: SATA max UDMA/133 cmd 0xB881A100 ctl 0x0 bmdma 0x0 irq 19 ata2: SATA max UDMA/133 cmd 0xB881A180 ctl 0x0 bmdma 0x0 irq 19 ata3: SATA max UDMA/133 cmd 0xB881A200 ctl 0x0 bmdma 0x0 irq 19 ata4: SATA max UDMA/133 cmd 0xB881A280 ctl 0x0 bmdma 0x0 irq 19 ata1: SATA link down (SStatus 0) scsi0 : ahci ata2: SATA link down (SStatus 0) scsi1 : ahci ata3: SATA link up 1.5 Gbps (SStatus 113) ata3: dev 0 cfg 49:2f00 82:746b 83:7d09 84:6063 85:7469 86:3d09 87:6063 88:203f ata3: dev 0 ATA-6, max UDMA/100, 195371568 sectors: LBA48 ata3: dev 0 configured for UDMA/100 scsi2 : ahci ata4: SATA link down (SStatus 0) scsi3 : ahci Vendor: ATA Model: TOSHIBA MK1032GS Rev: AS02 Type: Direct-Access ANSI SCSI revision: 05 ata_piix 0000:00:1f.1: version 1.05 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: PATA max UDMA/100 cmd 0x40E8 ctl 0x40FE bmdma 0x40C0 irq 18 ata6: PATA max UDMA/100 cmd 0x40E0 ctl 0x40FA bmdma 0x40C8 irq 18 ata5: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:101f ata5: dev 0 ATAPI, max UDMA/66 ata5: dev 0 configured for UDMA/66 scsi4 : ata_piix ATA: abnormal status 0x7F on port 0x40E7 ata6: disabling port scsi5 : ata_piix Vendor: MATSHITA Model: DVD-R UJ-857 Rev: HAC1 Type: CD-ROM ANSI SCSI revision: 05 SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 10 SCSI device sda: drive cache: write back w/ FUA SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 10 SCSI device sda: drive cache: write back w/ FUA sda: sda1 sda2 sd 2:0:0:0: Attached scsi disk sda sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sd 2:0:0:0: Attached scsi generic sg0 type 0 sr 4:0:0:0: Attached scsi generic sg1 type 5 SCSI Media Changer driver v0.25 PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98405400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040a0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-4: new high speed USB device using ehci_hcd and address 3 Initializing USB Mass Storage driver... usb 1-4: configuration #1 chosen from 1 choice usb 2-2: new full speed USB device using uhci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input0 input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input1 input: USB HID v1.11 Mouse [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input2 input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2 input: HID 05ac:1000 as /class/input/input3 input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 input: HID 05ac:1000 as /class/input/input4 input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice EFI Variables Facility v0.08 2004-May-17 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 248k freed Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher Registering unionfs 1.1.3 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 hw_random hardware driver 1.0.0 loaded sky2 eth0: enabling interface Linux agpgart interface v0.101 (c) Dave Jones ieee1394: Initialized config rom entry `ip1394' agpgart: Detected an Intel 945GM Chipset. agpgart: AGP aperture is 256M @ 0x0 ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: Unexpected PCI resource length of 1000! ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[94000000-940007ff] Max Packet=[2048] IR/IT contexts=[8/8] PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0016cbfffe52627e] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com usb 1-1: new high speed USB device using ehci_hcd and address 6 usb 1-1: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 Vendor: I-Stick2 Model: IntelligentStick Rev: 0.00 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdb: 1015808 512-byte hdwr sectors (520 MB) sdb: Write Protect is off sdb: Mode Sense: 00 00 00 00 sdb: assuming drive cache: write through SCSI device sdb: 1015808 512-byte hdwr sectors (520 MB) sdb: Write Protect is off sdb: Mode Sense: 00 00 00 00 sdb: assuming drive cache: write through sdb: [CUMANA/ADFS] sdb1<5>sd 6:0:0:0: Attached scsi removable disk sdb sd 6:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete Buffer I/O error on device sdb1, logical block 2995197568 Buffer I/O error on device sdb1, logical block 2995197569 Buffer I/O error on device sdb1, logical block 2995197570 Buffer I/O error on device sdb1, logical block 2995197571 Buffer I/O error on device sdb1, logical block 2995197572 Buffer I/O error on device sdb1, logical block 2995197573 Buffer I/O error on device sdb1, logical block 2995197574 Buffer I/O error on device sdb1, logical block 2995197575 Buffer I/O error on device sdb1, logical block 2995197568 Buffer I/O error on device sdb1, logical block 2995197569 printk: 56 messages suppressed. Buffer I/O error on device sdb1, logical block 2995197568 Buffer I/O error on device sdb1, logical block 2995197569 Buffer I/O error on device sdb1, logical block 2995197570 Buffer I/O error on device sdb1, logical block 2995197571 FAT: invalid media value (0x01) VFS: Can't find a valid FAT filesystem on dev sdb1. hfs: unable to find HFS+ superblock SQUASHFS error: Can't find a SQUASHFS superblock on sdb1 usb 1-1: USB disconnect, address 6 usb 1-1: new high speed USB device using ehci_hcd and address 7 usb 1-1: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 7 Vendor: I-Stick2 Model: IntelligentStick Rev: 0.00 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdb: 1015808 512-byte hdwr sectors (520 MB) sdb: Write Protect is off sdb: Mode Sense: 00 00 00 00 sdb: assuming drive cache: write through SCSI device sdb: 1015808 512-byte hdwr sectors (520 MB) sdb: Write Protect is off sdb: Mode Sense: 00 00 00 00 sdb: assuming drive cache: write through sdb: [CUMANA/ADFS] sdb1<5>sd 7:0:0:0: Attached scsi removable disk sdb sd 7:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete printk: 12 messages suppressed. Buffer I/O error on device sdb1, logical block 2995197568 Buffer I/O error on device sdb1, logical block 2995197569 Buffer I/O error on device sdb1, logical block 2995197570 printk: 63 messages suppressed. Buffer I/O error on device sdb1, logical block 2995197568 FAT: invalid media value (0x01) VFS: Can't find a valid FAT filesystem on dev sdb1. hfs: unable to find HFS+ superblock SQUASHFS error: Can't find a SQUASHFS superblock on sdb1 usb 1-1: USB disconnect, address 7 usb 1-1: new high speed USB device using ehci_hcd and address 8 usb 1-1: configuration #1 chosen from 1 choice scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 8 Vendor: I-Stick2 Model: IntelligentStick Rev: 0.00 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdb: 1015808 512-byte hdwr sectors (520 MB) sdb: Write Protect is off sdb: Mode Sense: 00 00 00 00 sdb: assuming drive cache: write through SCSI device sdb: 1015808 512-byte hdwr sectors (520 MB) sdb: Write Protect is off sdb: Mode Sense: 00 00 00 00 sdb: assuming drive cache: write through sdb: sdb1 sd 8:0:0:0: Attached scsi removable disk sdb sd 8:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete